Tanner EDA and Dongbu HiTek Semiconductor Jointly Develop Foundry-certified Process Design Kits (PDKs) for Critical Process Nodes
Leaders in A/MS design innovation to deliver certified libraries, integrated flow
MONROVIA, California and SEOUL, Korea – March 24, 2010 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal (A/MS) integrated circuits (ICs) and Dongbu HiTek, a world-class wafer fabricator, are jointly developing foundry-certified process development kits (PDKs) that will be integrated seamlessly into Tanner’s cohesive, integrated tool flow. Designers using Tanner software solutions will have certified libraries to draw on as they create ICs at critical process nodes for production at Dongbu foundries, reducing design risk and providing faster time to market and higher quality of outcomes.
Dongbu HiTek has distinguished itself as a global A/MS technology leader since launching the world’s first foundry BCDMOS process at the 0.18 micron node in June 2008. Tanner EDA is focused on providing innovative solutions to designers of breakthrough A/MS ICs. Driven by customer demand, jointly developed and maintained foundry-certified PDKs will deliver access to Dongbu HiTek’s 0.35 micron BCDMOS process on Tanner’s tool flow. This BCDMOS process is ideal for integrating analog circuits (using Bipolar), logic circuits (using CMOS) and high-voltage circuits (using DMOS) all on the same chip.
“Our aim is to be the most respected analog foundry in the business,” said Taek Soo Kim, Ph.D, vice president of Dongbu’s HiTek’s technical engineering division. “This collaboration with Tanner, which has provided complete A/MS design solutions for so many leading-edge products, demonstrates our continuing commitment to provide Dongbu customers with the best choices in electronic design automation software.”
“This joint PDK is ideal for designers creating solutions in consumer electronics, mobile handsets and automotive applications,” said John Zuk, VP of Marketing and Strategy for Tanner EDA. “At 0.35 microns, Dongbu HiTek’s analog process has proven effective in reducing both manufacturing cost and time-to-market. This collaboration with a foundry as well-respected as Dongbu HiTek will enable us to continue delivering on our commitments of interoperability, productivity and quicker design cycles for our customers.”
Availability of Foundry-certified PDKs
Joint development is ongoing. Tanner EDA and Dongbu HiTek anticipate the first set of foundry-certified PDKs in Q3, 2010, with additional PDKs available later in the year.
About Dongbu HiTek
Dongbu HiTek Headquartered in Seoul, Korea, Dongbu HiTek Co., Ltd. offers advanced products and services across two major business areas: Agriculture and Semiconductor. The Semiconductor Business provides specialized chip foundry services that add high value to display, mobile and various analog applications. The company’s two world-class fabs currently process 200mm wafers at nodes ranging from 0.35 microns to 90 nanometers. This wafer processing is supported by comprehensive design support (IP and design libraries), prototype development/verification, and packaging/module development. The Semiconductor Business specializes in developing best-in-class Analog, High Voltage CMOS, CMOS RF and BCDMOS technologies, CMOS Image Sensor (CIS), and Display Driver IC (DDI) chips as well as chips that incorporate NOR Flash memory functions. Dongbu HiTek’s stock is publicly traded under 000990 on the Korea Stock Exchange. For more information, visit www.dongbuhitek.com
About Tanner EDA
Tanner EDA provides of a complete line of software solutions that catalyze innovation for the design, layout and verification of analog and mixed-signal (A/MS) integrated circuits (ICs). Customers are creating breakthrough applications in areas such as power management, displays and imaging, automotive, consumer electronics, life sciences, and RF devices. A low learning curve, high interoperability, and a powerful user interface improve design team productivity and enable a low total cost of ownership (TCO). Capability and performance are matched by low support requirements and high support capability as well as an ecosystem of partners that bring advanced capabilities to A/MS designs.
Founded in 1988, Tanner EDA solutions deliver just the right mixture of features, functionality and usability. The company has shipped over 33,000 licenses of its software to more than 5,000 customers in 67 countries.
HiPer Verify and HiPer Silicon are trademarks of Tanner Research, Inc.
All other trademarks and trade names are the property of their respective owners.